Search options Open Hide
  

Choose category
  orReset
Bestsellers
24 Per Page
70-6299, E6299, 40-0418, 57-3620 - Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards
seal6299
Triumph Primary Chain Adjuster Plug Viton O Ring - Unit Twins From 1969 Onwards
£0.65 (£0.78 inc VAT)
OEM: 70-6299, E6299, 40-0418, 57-3620, 70-7431, E7431
Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards O ring seal for the adjuster plug as used on all unit twins from...
In stock
37-7175, 37-4136, 37-4275 - Triumph Drilled Brake Disc - 4 Hole - 750cc Disc Brake Models From 1973 Onwards
disc7175R-C17
Triumph Drilled Brake Disc - 4 Hole - 750cc Disc Brake Models From 1973 Onwards
£58.95 (£70.74 inc VAT)
OEM: 37-7175, W7175, 37-4136, W4136, 37-4275, W4275
Triumph Drilled Brake Disc - 4 Hole - 750cc Disc Brake Models From 1973 Onwards Lightened cast iron front or rear disc s uitable for disc brake twins...
In stock
60-0068, D68 - Triumph Rear Number Plate Gold Transfer - Pre Unit Models Circa 1946-58
trans0068-T7
Triumph Rear Number Plate Gold Transfer - Pre Unit Models Circa 1946-58
£2.45 (£2.94 inc VAT)
OEM: 60-0068, D68
Triumph Rear Number Plate Gold Transfer - Pre Unit Models Circa 1946-58 Gold on clear vinyl decal featuring the Triumph logo + Regd. Gt Britain No....
In stock
14-0115, 14-115 - 5/16" UNF - 7/8" Hexagonal Bolt - Fully Threaded
bolt0115-B19
5/16" UNF - 7/8" Hexagonal Bolt - Fully Threaded - 14-0115
£0.75 (£0.90 inc VAT)
OEM: 14-0115, 14-115
5/16" UNF - 7/8" Hexagonal Bolt - Fully Threaded - 14-0115 Fully threaded hexagonal bolt as used extensively on unit models - frame, footrest, mudguard...
In stock
90-7029, 82-9039, F9039, 29-7368 - BSA / Triumph Brake Rod Adjusting Nut - Singles and Twins Circa 1961-70
brake7029-C18
BSA / Triumph Brake Rod Adjusting Nut - Singles and Twins Circa 1961-70
£6.95 (£8.34 inc VAT)
OEM: 90-7029, 82-9039, F9039
BSA / Triumph Brake Rod Adjusting Nut - Singles and Twins Circa 1961-70 Brake adjuster ferrule - correct fitment on various unit singles and twins...
In stock
R27A/CP - Replacement Fuel Tap Plunger - Turn to Lock - Push Off
tappart104P-F3
Fuel Tap Plunger - Pull on - Turn to Lock - Push Off
£4.95 (£5.94 inc VAT)
OEM: R27A/CP
Replacement Fuel Tap Plunger - Turn to Lock - Push Off Fuel tap plunger for use on plunger type petrol taps. Simple turn to lock and push off...
In stock
 
70-3723, E3723 - Triumph Oil Sump Filter Cork Sealing Washer - Unit 350/500cc Models
wash3723
Triumph Oil Sump Filter Cork Sealing Washer - Unit 350/500cc Models
£0.75 (£0.90 inc VAT)
OEM: 70-3723, E3723
Triumph Oil Sump Filter Cork Sealing Washer - Unit 350/500cc Models Cork sump filter sealing gasket as used 3TA, 5TA, T100 and TR5T models from 1959...
In stock
8291-216-000 - 40mm OD Copper Exhaust Pipe Gasket - Honda TL125, TLR200, XL Models + Universal Fit
gkt140H
40mm OD Copper Exhaust Gasket - Honda TL125, TLR200, XL185 + Universal Fit
£1.95 (£2.34 inc VAT)
OEM: 18291-216-000
40mm OD Copper Exhaust Pipe Gasket - Honda TL125, TLR200, XL Models + Universal Fit Hollow copper crush washer to provide a good seal between the header...
In stock
520 Regina Classic Motorcycle Chain Half Link
fk520half
520 Regina Classic Motorcycle Chain Half Link
£5.45 (£6.54 inc VAT)
520 Regina Classic Motorcycle Chain Half Link To fit 135RESR 5/8" x 1/4" (P x W) standard 520 chain equivalent to Renold 110054. Allows you to make up...
In stock
Air Filter Element - Triumph & BSA Twins - OEM: 60-4265 - OEM: 60-4265
filt628-F7
Air Filter Element - Triumph & BSA Twins - OEM: 60-4265
£15.95 (£19.14 inc VAT)
OEM: 60-4265
Triumph and BSA Twins Air Filter Element Suitable for Triumph T140 (1974 on) and BSA A65 OIF Rectangular hole in back plate Two versions available:...
In stock
Footrest Rubbers BSA - Oval
rub22
Footrest Rubber BSA - Oval - Pair
£8.95 (£10.74 inc VAT)
OEM: 72-8321, 29-7551
Footrest Rubbers BSA - Oval Oval, Not Branded. Priced for a pair D7, D10, D14, A7,A10, A50, A65, B31, B33, B34, B40, C15, Oval Pattern. L: 4+1/2" OEM:...
In stock
pmp202H-B18
Triumph Unit Oil Pump - UK Made
£69.95 (£83.94 inc VAT)
OEM: 70-9421, 70-3878, 70-6928, E9421, E3878, E6928
Triumph Unit Oil Pump - UK Made Dual plunger Triumph engine oil pump for 350cc, 500cc, 650cc and 750cc unit twins including: 3TA, 5TA, T90, T100, TR6,...
In stock
Headlamp Headlight Rubber Grommet for Flat back ShellsAs fitted to BSA A65, A70, R3 and Triumph T120, TR6, T150 models.OEM: LU54524048, 19-1349, 99-1026
rub923-A4
Flat Back Shell Headlamp Rubber Grommet
£5.95 (£7.14 inc VAT)
OEM: LU54524048, 19-1349, 99-1026
Headlamp Headlight Rubber Grommet for Flat back Shells As fitted to BSA A65, A70, R3 and Triumph T120, TR6, T150 models. OEM: LU54524048, 19-1349, 99-1026
In stock
Stainless Steel Top Dead Centre (TDC) Timing Tool - Dual Thread - Triumph
tool521-T13
Stainless Steel Top Dead Centre (TDC) Timing Tool - Dual Thread - Triumph
£13.45 (£16.14 inc VAT)
Stainless Steel Top Dead Centre (TDC) Timing Tool - Dual Thread - Triumph This crankshaft lock tool is for early Unit Triumphs 1963 up to and...
In stock
65-3910 - BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch
clutch3910-B18
BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch
£12.95 (£15.54 inc VAT)
OEM: 65-3910
BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch Clutch bearing set of inner bearing race with ball bearings...
In stock
Yamaha Chain Tensioner Assembly - TY125, TY175 and TY250 Twinshock Models
off-ten005
Yamaha Chain Tensioner Assembly - TY125, TY175 and TY250 Twinshock Models
£17.95 (£21.54 inc VAT)
Yamaha Chain Tensioner Assembly - TY125, TY175 and TY250 Twinshock Models Correct fitment on TY twinshock models + universal fit on other trials bikes....
In stock
Classic High Rise Motocross Braced Handlebars - 7/8" - 6+1/2" Rise
off-bar004
Classic High Rise Motocross Braced Handlebars - 7/8" - 6+1/2" Rise
£42.50 (£51.00 inc VAT)
Classic High Rise Motocross Braced Handlebars - 7/8" - 6+1/2" Rise Designed in association with Sammy Miller these are low rise braced bars suitable for...
In stock
12mm Fuel Tap with 90° Spigot Outlet and Filter - MAIN - ON/OFF/RESERVE
off-tap002-F2
12mm Fuel Tap with 90° Spigot Outlet and Filter - MAIN - ON/OFF/RESERVE
£9.95 (£11.94 inc VAT)
12mm Fuel Tap with 90° Spigot Outlet and Filter - MAIN - ON/OFF/RESERVE This tap has a 38mm tube allowing reserve fuel to remain in tank. Includes a...
In stock
83-3318, 68-8035, F13318 - Triumph/BSA OIF Models - Fuel Tank Beading Holding - Centre Seam Tanks
tank3318-E9
Triumph/BSA OIF Models - Fuel Tank Beading Holding - Centre Seam Tanks
£9.95 (£11.94 inc VAT)
OEM: 83-3318, 68-8035, F13318
Triumph/BSA OIF Models - Fuel Tank Beading Holding - Centre Seam Tanks Correct fitment on Triumph and BSA models with a raised centre seam and central...
In stock
Alloy Gear Lever - Yamaha TY Models + Honda TLR Models - 11mm Spline - Standard Length
off-glev829
Alloy Gear Lever - Yamaha TY + Honda TLR Models - 11mm Spline - Standard Length
£21.95 (£26.34 inc VAT)
Alloy Gear Lever - Yamaha TY + Honda TLR Models - 11mm Spline - Standard Length Forged alloy left hand gear shift lever with folding spring loaded foot...
In stock
82-0929, F929 - 5/16" CEI - 1/2" Hexagonal Bolt - Fully Threaded - 82-0929
bolt0929-B19
5/16" CEI - 1/2" Hexagonal Bolt - Fully Threaded - 82-0929
£2.45 (£2.94 inc VAT)
OEM: 82-0929, F929
5/16" CEI - 1/2" Hexagonal Bolt - Fully Threaded - 82-0929 Various uses on pre unit and unit Triumph models including: Silencer bracket securing bolt on...
In stock
37-0977, W977, 90-5719 - Grooved Front/Rear Brake Shoes - Triumph Tiger Cub Trials + BSA Bantam D7, D10, D14 Models - Pattern
off1-shoe270G
Grooved Front/Rear Brake Shoes - Triumph Tiger Cub Trials + BSA Bantam D7, D10, D14 Models
£13.95 (£16.74 inc VAT)
OEM: 37-0977, W977, 90-5719
Grooved Front/Rear Brake Shoes - Triumph Tiger Cub Trials + BSA Bantam D7, D10, D14 Models Pair of grooved brake shoes for improved braking in wet and...
In stock
 
60-1861, 61-7014, DA50/1, 61-3766, D1861 - K2F Magneto Gear/Pinion Puller Tool - 1" Thread - Pre Unit Triumph + BSA A7 and A10 Models
tool1861m
K2F Magneto Gear/Pinion Puller Tool - 1" Thread - Pre Unit Triumph + BSA A7 and A10 Models
£10.95 (£13.14 inc VAT)
OEM: 60-1861, 61-7014, DA50/1, 61-3766, D1861
K2F Magneto Gear/Pinion Puller Tool - 1" Thread - Pre Unit Triumph + BSA A7 and A10 Models Used to withdraw the magneto pinion on K2F magnetos, as...
In stock
Triumph T100 Clutch Cable - OEM: 60-0566, 60-1995
cable755
Triumph T100 Clutch Cable
£8.95 (£10.74 inc VAT)
OEM: 60-0566, 60-1995
Triumph Clutch Cable Suitable for following: Triumph - 3TA, 5TA, T100C/T100R (1965-68) barrel nipple, T100S/S/T100T/T100R/T100C (1969 on) barrel nipple....
In stock
21 - 35  Prev
29 30 31 32 33 34 35 36 37 38 39 40 41 42 43
Next  37 - 51
    Cancel